ICCTURKEY POLYPET

WATERPROOFING MEMBRANE

BITUMEN WATERPROOFING MEMBRANES

SHINGLE DESIGN - EMULSION

APP POLYPET SPUNBOND POLYESTER MAT REINFORCED APP MODIFIED BITUMINOUS WATERPROOFING MEMBRANES

Polysuper waterproofing membranes are made of modified bimumen with APP(Atactic Polyproplene)APP brings in bitumen bending at low temperature and resistivity to high temperature features.

These features are kept during lifetime of membrane. Polyester felt and fiberglass are used for carriage in Polysuper Group and therefore membrane is brought in resistivity for  hauling and breakage. Polysuper Group composed of  two sides laminated with PE film, one side laminated with PE film other side laminated with aluminium folio or slate flakes. They are recommended for waterproofing applications in warm and mild climates of regions.

ICCTURKEY Polypet intends to meet specific customer requirements and offers Polysuper group products in different thicknesses and features. Polysuper Group can be used for all kind of waterproofing applications especially for grounding and terrace applications.

-Its application is so easy that can applied on all kind of surfaces such as parapet returns, chimney grounds and dilatation parts

-It can be applied easily without giving any scraps

 -Saving of time and workmanship

-While being stretching constant high, it is resistive for earth’s crust movements and expansion differences.

-It doesn’t require any repair or maintenance  and it is durable with lifetime of building.

-It is not damaged by atmospheric conditions and structural chemicals.

-Material usage amount can be estimated beforehand.

-Polyester felt brings in high stretching and breakage resistance.

-Membrane rolls mustn’t be exposed to sun lights, instantaneous heat exchanges and they must be stored in closed and dark places

-They must be stocked with upright position.

-There mustn’t be stocked on the top of the other and put heavy loading on the rolls

-The rolls must be carried on upright position

POLY SUPER PP500, PP400, PP300

Description

- APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with polyester felt 180 gr/m²

- Both sides are laminated with PE film

Application Fields

- Water and stream insulation of wet volumes

- Terrace and acclivitous roofings

- Pressured underground water applications

- Retaining and basement walls applications

- Rain streams, balconies,greenhouses, concrete canalets, garden terraces, water tanks, ponds, dirty water purification applications, car parks and hidden stream applications

Application
10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally.

POLY SUPER PAL 3000
Description

- APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with polyester felt 180 gr/m²

- One side is laminated with PE and other side laminated with aluminium folio

Application Field

- As second layer for the dome and vaults type of roofings

- As second layer for the the hidden stream insulations

- As second layer for the chimney gorunds insulations

Application
10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally.

- APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with polyester felt 180 gr/m²

- One side is laminated with PE film and other side is laminated with red, gren or white colours of slate flakes

Application Fields

- On prefabricated dilatational buildings

- On non-ambulated terrace roofings

- On acclivitous roofings

- On the dome and vaults type of roofings

Application
10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally

POLY SUPER CP 300, CP 200
Description

-APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with fiberglass 60 gr/m²

- Both sides are laminated with PE film

Application Fields

-The grounds and walls of Fundamentals

-The terraces and wet volumes

-The roof tiles and on the wooden roofings

-The water tanks

-The pools

-Multilayered car parks

Application
10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally

POLY SUPER CAL 3000

-APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with fiberglass 60 gr/m²

- One side laminated with PE film and other side laminated with aluminium folio

- As second layer for the dome and vaults type of roofings

- As second layer for the the hidden stream insulations

- As second layer for the chimney gorunds insulations

10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally

POLY SUPER CAR 300

Description

- APP (Atactic polypropilen) modified plastomeric waterproofing membrane

- Reinforced with fiberglass 60 gr/m²

- One side laminated with PE film and other side laminated with red, gren or white colours of slate flakes

Application Field

- On the dome and vaults type of roofings

- On non-ambulated terrace and garden roofings

- On acclivitous roofings

Application

10 cm from connection points and 15 cm from ending points are remained on the rolls to overlappling of rolls and by means of welding torch application is made in longitudinally or sectionally

SBS POLYPET INORGANIC GLASS TISSUE REINFORCED SBS MODIFIED BITUMINOUS WATERPROOFING MEMBRANES

PS300 PS400

SBS POLYPET INORGANIC GLASS TISSUE REINFORCED SBS MODIFIED BITUMINOUS WATERPROOFING MEMBRANES

CS200 CS300

SHINGLE DESIGN

Poly shingle design assures perfect and longlasting waterproofing qualities and offers decorative alternatives. Poly Shingle Design is the best technical material for longlasting waterproofing applications by considering aestehetic requirements.The absolute dimensional stability both before and after application is extremely important and for this reason Poly Shingle Design has the most advanced technical features and spunbond polyester felt which increases elongation of break stability.

The top surface of Poly Shingle Design is coated with slate flakes wholly excluding side strip which is aparted for overlapping torch welding. These slate flakes increase the longlasting of bituminous membranes and create decorative aspects.

*Poly Shingle Design is a decorative Polypet membrane.

*Poly Shingle Design membranes are made of distilled bitumen and content high elastomeric and plastomeric additives.

*Top side is covered with slate flakes with different colour and design alternatives.

*Maximum performance at high and low temperature degrees.

*New generation of Poly Shingle Design is self-protected material with decorative aspects. *It is aparted from similar materials with application advantages.

*Being a whole product and adhering easily through a welding torch, make it resistive againist hard
weather conditions

*It is very light material and bring off the roof extra heaviness when compared other roofing materials.

*Being an economical material and easy application advantages makes it mostly preferable material.

Poly Shingle Design offers new generation of self-protected membranes for covering of buildings in a colorfulway, with design and color alternatives.